What CCMT 09T302 means, letter by letter: rhombic 80°, positive, 7° clearance, tolerance M, 40–60° countersunk hole, chipbreaker one side. Inscribed circle 9.525 mm, thickness 3.97 mm, nose radius 0.2 mm.
C1C2M3T4095T36027
1 · SHAPERhombic 80°C
2 · CLEARANCE7°C
3 · TOLERANCEClass Mmedium, pressed
4 · TYPET40–60° countersunk hole, chipbreaker one side
5 · SIZE09inscribed Ø 9.525 mm · cutting edge 9.7 mm
6 · THICKNESS3.97 mmT3
7 · NOSE RADIUS0.2 mm02
To scale: top view with the inscribed circle (blue dashes) and, on the right, the side view with the thickness. The grey dashes mark the chipbreaker; its real shape is up to the manufacturer.
CCMT 09T302 dimensions
Inscribed circle IC
9.525 mm
Cutting edge length
9.67 mm
Thickness s
3.97 mm
Nose radius rε
0.2 mm
Corner angle
80°
Clearance angle
7°
Tolerance M
IC ±0.05 · corner height ±0.08 · thickness ±0.13 mm
What CCMT 09T302 tells you on the shop floor
80° corner: strong yet versatile, turns and faces with the same insert.
Positive insert (7°): lower cutting forces and less chatter. For finishing, boring, thin-walled parts and lighter machines.
Pressed, medium tolerance: economical, fine for roughing and where you do not need repeatability to a few hundredths of a mm at every insert change.
Small radius: lower forces and chatter, good finish at low feed.
Typical holders for CCMT
For a positive rhombic 80° insert the most common ISO 5608 holders are:
SCLCR/L · lead angle 95°
SCACR/L · lead angle 90°
The final R or L means right or left hand. Shank size, length and the exact clamping are in the manufacturer's catalogue.
Designation to ISO 1832; reference tables: Mitsubishi Materials turning catalogue (insert identification). Holders to ISO 5608. Chipbreaker, grade and cutting data differ between manufacturers: the catalogue of the insert you use is what counts.
Got another code? Type it into the decoder and read it at once.
CCMT 09T302: rhombic 80°, positive, 7° clearance, tolerance M, 40–60° countersunk hole, chipbreaker one side. Inscribed circle 9.525 mm, thickness 3.97 mm, nose radius 0.2 mm.
What is the inscribed circle of CCMT 09T302?
9.525 mm, with a 9.7 mm cutting edge.
Which holder takes CCMT 09T302?
An ISO 5608 holder for positive rhombic 80° inserts, for example SCLCR/L or SCACR/L.
What problem it solved, how much time it saves you, what is missing. We read everything. We only publish with your permission, and only the way you choose.
Thank you. We have it: if you allowed publishing, we will write to you to confirm before it goes online.